Api 1104 21st Edition Torrent

Please note: as a requirement of the API committee that develops this publication, some errata and addendums may not be available as standalone files, they are simply incorporated into the base publication.
Please note: The redline edition of this publication is a comparison of the original version of the 21st edition to the 20th edition, it does not incorporate future addenda, errata. The official version of the standard that accompanies the purchase of the redline, will include the updates (addenda, errata).
Please note: for the non-English versions of this standard, addenda and errata may not be included.
API Standard 1104, 21st Edition is the industry standard for welding practices. Welding of Pipelines and Related Facilities presents methods for the production of high-quality welds through the use of qualified welders using approved welding procedures, materials and equipment in a new, clearly understood format.
Wide in scope and filled with years of accumulated industry knowledge, the latest edition of 1104 presents inspection methods to ensure the proper analysis of welding quality through the use of qualified technicians and approved methods and equipment.
This standard presents methods for the production of high-quality welds through the use of qualified welders using approved welding procedures, materials, and equipment.
This standard covers the gas and arc welding of butt, fillet, and socket welds in carbon and low-alloy steel piping used in the compression, pumping, and transmission of crude petroleum, petroleum products, fuel gases, carbon dioxide, nitrogen, and where applicable, covers welding on distribution systems. It applies to both new construction and in-service welding. The welding may be done by a shielded metal arc welding, submerged arc welding, gas tungsten arc welding, gas metal arc welding, flux-cored arc welding, plasma arc welding, oxyacetylene welding, or flash butt-welding process or by a combination of these processes using a manual, semiautomatic, mechanized, or automatic welding technique or a combination of these techniques. The welds may be produced by position or roll welding or by a combination of position and roll welding.
This standard also presents inspection methods to ensure the proper analysis of welding quality through the use of qualified technicians and approved methods and equipment. It covers the procedures for radiographic, magnetic particle, liquid penetrant, and ultrasonic testing, as well as the acceptance standards to be applied to production welds tested to destruction or inspected by radiographic, magnetic particle, liquid penetrant, ultrasonic, and visual testing methods.
While this standard is comprehensive, it may not address all issues that may arise. The absence of guidance or requirements is not to be considered prohibitive to a particular activity or approach that is based upon sound engineering judgment. For example, other industry standards, reliable engineering tests and analyses, or established industry.

This document specifies requirements for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair, and remanufacture of wellhead and tree equipment for use in the petroleum and natural gas industries. This document does not apply to field use, field testing, or field repair of wellhead and Christmas tree equipment.
This document is applicable to the following specific equipment: wellhead equipment (integral, blind, and test flanges; ring gaskets; threaded connectors; tees and crosses; bullplugs; valve-removal plugs; standard and nonstandard top connectors; crossover connectors; other end connectors; adapter spools and spacer spools; gate, plug, and ball valves; actuated valves [manual and remote]; check valves [swing- and lift-type]; back-pressure valves; slip-type and mandrel-type casing and tubing hangers, casing and tubing heads [housings and adapters]; chokes [fixed, manually actuated, remotely actuated]; actuators [for valves and chokes]; surface safety valve (SSV) assemblies, valves prepared for actuators, and actuators; underwater safety valve [USV] assemblies, valves prepared for actuators, and actuators; boarding shutdown valve [BSDV] assemblies, valves prepared for actuators, and actuators; and tree assemblies).
This document defines service conditions in terms of pressure, temperature, and material class for the well-bore constituents, and operating conditions. This international standard establishes requirements for four product specification levels (PSL). These four PSL designations define different levels of technical quality requirements.
For more information, visit: https://www.api.org/products-and-services/standards/important-standards-announcements/spec-6a.